faux/xml-examples/klish/etc/clish-enable/route.xml

<?xml version="1.0" encoding="UTF-8"?>
<CLISH_MODULE xmlns="http://clish.sourceforge.net/XMLSchema" 
          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
 xsi:schemaLocation="http://clish.sourceforge.net/XMLSchema
                     http://clish.sourceforge.net/XMLSchema/clish.xsd">
	<!--=======================================================-->

<VIEW name="enable-view">

<!-- Show routing information -->

	<COMMAND name="show ip route"
		help="IP routing table"
		lock="false"
		interrupt="true">
		<ACTION>ip route show</ACTION>
	</COMMAND>

</VIEW>


<VIEW name="configure-view">

<!-- Enable/Disable routing -->

	<COMMAND name="ip routing"
		help="Enable IP routing">
		<CONFIG operation="unset" pattern="^no ip routing"/>
		<ACTION>
		echo "1" > /proc/sys/net/ipv4/ip_forward
		</ACTION>
	</COMMAND>

	<COMMAND name="no ip routing"
		help="Disable IP routing">
		<CONFIG priority="0x1500"/>
		<ACTION>
		echo "0" > /proc/sys/net/ipv4/ip_forward
		</ACTION>
	</COMMAND>

<!-- Default gateway -->

	<COMMAND name="ip default-gateway"
		help="Specify default gateway (if not routing IP)">
		<PARAM name="ip"
			help="IP address of default gateway"
			ptype="IP_ADDR"/>
		<CONFIG priority="0x9000" splitter="false"/>
		<ACTION>
			ip route replace to default via ${ip}
		</ACTION>
	</COMMAND>

	<COMMAND name="no ip default-gateway"
		help="Specify default gateway (if not routing IP)">
		<CONFIG operation="unset" pattern="^ip default-gateway"/>
		<ACTION>
			ip route delete to default
		</ACTION>
	</COMMAND>

<!-- Set/Unset static route -->

	<COMMAND name="ip route"
		help="Establish static routes">
		<PARAM name="ip"
			help="Destination prefix"
			ptype="IP_ADDR_MASK"/>
		<PARAM name="route_target"
			help="Route target"
			ptype="STRING"
			mode="switch">
			<PARAM name="ethernet"
				help="Ethernet IEEE 802.3"
				ptype="SUBCOMMAND"
				mode="subcommand">
					<PARAM name="iface_num"
						help="Ethernet interface number"
						ptype="IFACE_NUM"/>
			</PARAM>
			<PARAM name="forward"
				help="Forwarding router's address"
				ptype="IP_ADDR"/>
		</PARAM>
		<CONFIG priority="0x9002" pattern="^ip route ${ip} " splitter="false"/>
		<ACTION>
		if test "${route_target}" = "ethernet"; then
			ip route replace to ${ip} dev eth${iface_num}
			exit $?
		elif test "${route_target}" = "forward"; then
			ip route replace to ${ip} via ${forward}
			exit $?
		fi
		</ACTION>
	</COMMAND>

	<COMMAND name="no ip route"
		help="Establish static routes">
		<PARAM name="ip"
			help="Destination prefix"
			ptype="IP_ADDR_MASK"/>
		<CONFIG operation="unset" pattern="^ip route ${ip} "/>
		<ACTION>
		ip route delete to ${ip}
		</ACTION>
	</COMMAND>

</VIEW>

</CLISH_MODULE>